membrane press glue for MDF/ PVC (used in vacuum press machine)
1.Application: Suitable for vacuum forming PVC soft material to MDF, particle board, wood, etc., can be used for wooden doors, cabinet doors, loudspeaker board, and computer desk and so on.
2.Usage Method: Spray or brush.
3. Physical properties
4.Storage and package Under 5~30°C, the glue can be stored within 3~6 months. The storage temperature should not be under 0°C, otherwise the glue will turn into jelly or much undissolved substance will appear in the glue. If this glue can't be used.
5.Procedure (1)Spray the glue to the part of wood which needs wrapping with spray gun until a while and even layer of glue appears on the surface. (2)After the glue dries naturally, i. E. The white glue becomes transparent and no fingerprint is left after pressed by fingers, the wood can be put into the vacuum forming machine. (3)Use the vacuum forming machine to wrap the wood. Due to the different specification of the machine and heat resistance of PVC film, the heating temperature shown on the vacuum forming machine varies a lot, but is should subject to the temperature of the wood which is between 50-60° C. (4)The forming process in the vacuum forming machine (6 steps): Preheating, heating, vacuum-pumping, stop heating, vacuum removal, natural cooling.
cell 0086 13923155895
Packaging & Shipping
Covering an area of500,000 m², Good Chemical Science & Technology Co., Ltd.(GOOD) is one of the biggiest adhesive manufacturers in China and is located in the Industrial Development Zone of Sanshui District, Foshan City, Guangdong Province, with a total annual output of 200,000 tons. A large High-polymer Research Institute was established with a complete set of advanced production lines and precision instruments, GOOD specializes in producing more than 100 kinds of adhesive products, including solvent based adhesive, water based adhesive, spray adhesive, lamination adhesive, primer, cleansers, etc. Our products are widely used by shoe factories, shoe accessories factories, bag & luggage factories, furniture factories, lamination factories, door factories, automobile interior factories, etc.